Printkino
Back to Studio Download guide
Learn Printkino

Make your next
great print video.

Read a quick guide or learn by doing in Studio. Practice lessons open a sample in a separate tab, with autosave off. Your project stays where you left it.

Bring a modelMake it yoursShape the cameraExport a video
About 3 min · Hands-on

Your first video

Apply a preset, preview it, and prepare your export.

Start lesson(new tab)
About 3 min · Hands-on

Create a camera move

Reframe the preview, save a new view, and change its timing.

Start lesson(new tab)
About 3 min · Hands-on

Lens blur & focus

Control softness and keep attention on the layer being printed.

Start lesson(new tab)

Written guides

Your first print videoFilament & model appearanceGround, background & lightCreate a camera moveLens blur & focusPrint timing & the timelineSave & reuse presets
3 min read

Your first print video

A styled print animation, ready to export.

Try in Studio (new tab)

Start with a model

Open Studio and upload your print file, or choose Try a sample to explore with the vase. Your projects save on this device as you work.

  1. Choose your file from the start screen, or drag it into the upload area.
  2. Wait for the model preview to appear. Use the sample when you want to experiment first.

Choose a starting point

A preset combines appearance, camera movement, and timing. The Presets panel is your personal collection; Preset library holds the built-in starting points.

  1. Open Presets, then Preset library.
  2. Choose Apply on a preset to use it immediately. Add stores it in My presets without changing your video.
  3. Close the library and press Play to preview the whole animation.
Applying a preset can change several settings at once. Use Undo if you prefer your previous result.

Export your video

The preview is where you make decisions; Export video creates the downloadable file.

  1. Choose the canvas aspect ratio in the top bar for where you plan to share it.
  2. Open Export video and review the format, resolution, and frame rate.
  3. Start the export and keep the tab open until it finishes. Download the resulting video.
The interactive lesson stops at export settings, so you can learn the flow without rendering a file.

Printkino user guide

Learn the core workflows. Interactive practice is available at /guide.

3 min read

Your first print video

A styled print animation, ready to export.

Start with a model

Open Studio and upload your print file, or choose Try a sample to explore with the vase. Your projects save on this device as you work.

  1. Choose your file from the start screen, or drag it into the upload area.
  2. Wait for the model preview to appear. Use the sample when you want to experiment first.

Choose a starting point

A preset combines appearance, camera movement, and timing. The Presets panel is your personal collection; Preset library holds the built-in starting points.

  1. Open Presets, then Preset library.
  2. Choose Apply on a preset to use it immediately. Add stores it in My presets without changing your video.
  3. Close the library and press Play to preview the whole animation.
Applying a preset can change several settings at once. Use Undo if you prefer your previous result.

Export your video

The preview is where you make decisions; Export video creates the downloadable file.

  1. Choose the canvas aspect ratio in the top bar for where you plan to share it.
  2. Open Export video and review the format, resolution, and frame rate.
  3. Start the export and keep the tab open until it finishes. Download the resulting video.
The interactive lesson stops at export settings, so you can learn the flow without rendering a file.
2 min read

Filament & model appearance

A print that looks like the filament and finish you want to show.

Choose filament and finish

The Model panel changes the print itself. Filament controls color; Finish controls how highlights reflect off its surface.

  1. Open Model and choose a named filament swatch, or use Custom color for your own shade.
  2. Compare Matte, Satin, Gloss, and Silk in the preview.
  3. Adjust Layer lines toward Smooth for a softer surface or Pronounced for stronger print texture.
Lighting changes how a finish reads. Compare a few lighting choices before settling on a material.

Shadows and orientation

Model shadow controls shading on the model and the shadows it casts. Rotate model changes the orientation of the print, rather than moving the camera.

  1. Switch Model shadow on or off to compare the look.
  2. Under Position & rotation, choose which face rests on the ground.
  3. Use Custom rotation only when you need a precise tilt or spin. Reset upright returns to the normal orientation.
2 min read

Ground, background & light

A consistent environment around your model.

Set the stage

Scene contains the setting, floor, background, and lighting. A surface can also match the background and lighting for a coordinated result.

  1. Open Scene and pick a ready-made scene, or On the printer to show the print bed and hot end.
  2. Choose a surface, or No ground to remove the floor.
  3. Turn Hot end on or off to show the print head laying down each layer.
No ground and Model shadow are separate controls. Hiding the floor does not change your model-shadow preference.

Shape the environment

The background frames the silhouette; lighting describes the print's shape and material.

  1. Open the Background tab and choose a backdrop, or Upload background photo.
  2. Open the Lighting tab and compare presets while looking at the edges and highlights.
  3. If an uploaded image is no longer needed, use Remove photo in its controls.
3 min read

Create a camera move

A camera path that moves between your own compositions.

Understand views and movement

A view is a saved camera composition at one moment. The camera travels between views. A motion preset gives you a starting path with Start and End views.

  1. Open Camera and choose a motion starting point, or select a view in the Camera lane.
  2. Drag the main preview to turn around the model, scroll or pinch to zoom, and double-click to fit it in the frame. Hold Shift for slow, fine movement. This is a temporary view until you keep it.
  3. On the bar, choose New view to add one at the playhead, or Start or End to replace that view.
Reset view discards temporary framing and returns to the video's camera path.

Add a view five seconds later

When the playhead is already on a view, +5 s on the bar saves the framing you are looking at five seconds after it, keeping your existing views.

  1. Leave at least five seconds before the end of the video, with no view already occupying the destination.
  2. Drag the preview to create your new composition.
  3. Choose +5 s. The playhead moves to the new view.
  4. Play the video to see the camera travel into it.
If the button is disabled, hover it for the reason. Move earlier in the timeline or leave space around another view.

Refine the path

The Camera lane is a time-based map of your views. Path view lets you inspect the camera's route in 3D.

  1. Drag a view thumbnail horizontally to change when the camera reaches it.
  2. Drag the hold handle beside a view to stay on that composition longer.
  3. Select a connection between views to change how the camera travels.
  4. Open Path view to reshape the route, then choose Done to return to the video preview.
Camera feel adds handheld movement to the exported video; the editing preview stays steady.
3 min read

Lens blur & focus

Depth of field that directs attention to your print.

Control the amount of blur

Lens blur creates depth of field. The aperture controls how strongly objects outside the focus area soften.

  1. Open Camera and switch Lens blur on.
  2. Lower Aperture toward f/1.4 for more blur. Raise it toward f/22 for less blur.
  3. Click the aperture value if you want to enter a precise f-number.
Blur depends on camera distance and scene depth. Try an angled close-up if the difference is subtle.

Choose what stays sharp

Follow layer is the default focus behavior. Focus moves with the layer being printed, so the newest part of the print stays the point of attention.

  1. Keep Follow layer selected for automatic focus as the print grows.
  2. Select Fixed distance when you want focus to stay at a chosen distance from the camera.
  3. Adjust Focus distance to position that focus. Raise the aperture f-number to keep more of the scene sharp.
  4. Return to Follow layer and play or scrub the timeline to inspect the result.
Focus distance positions the sharp plane. Aperture controls how quickly details soften in front of and behind it.
2 min read

Print timing & the timeline

A reveal paced to match your camera movement.

Navigate the animation

The ruler, Print lane, and Camera lane share the same time scale. The playhead shows the frame you are previewing.

  1. Click or drag the ruler to preview a moment. The readouts show time and current layer.
  2. Press Play or Space to watch. Use the frame-step buttons for small adjustments.
  3. Click the video-length value to change the total duration.
Playback speed changes how fast you preview. It does not change the exported video's speed.

Pace the print reveal

The strip under the ruler shows the start effect, the print and the ending. Without an ending, the print reaches its final layer on the last frame.

  1. Turn on an ending in Print › End to leave time for the completed model.
  2. Drag the ending's bar on the strip to make it longer or shorter.
  3. Click the Printing block to choose its reveal speed, then preview alongside the camera path.
The Print lane controls model progress. Camera views control composition. Adjust them together for a deliberate reveal.
2 min read

Save & reuse presets

A personal collection of looks, camera moves, and timing setups.

Build your collection

Presets are reusable settings. A project also contains your model and its edits. Saving a preset does not replace your project.

  1. Open Presets and choose Save current as a preset.
  2. Give it a recognizable name and choose which settings to include.
  3. Choose Save to My presets. The preset appears in your collection.
  4. Use the preset's management menu to rename it, export a file, copy a link, or remove it.
Removing a saved preset offers Undo. It does not undo settings already applied to your video.

Import and apply

Add and Apply have different jobs: Add stores a preset; Apply changes the current video.

  1. Open Preset library to browse built-in choices. Add keeps one without changing the video.
  2. Use Import file for a preset someone shared with you.
  3. Choose Add to My presets to store it, or Add & apply to use it now.
  4. Review any confirmation before replacing your custom camera views.
Projects and saved presets are stored on this device. Export preset files when you want a portable copy.